🕴️Network Assistant Tool

Overview

The Network Assistant Tool is an easy-to-use utility that configures your network adapter to reach the management IP of the radio.

It specifically allows users to enable DHCP coexistence on their network adapter where you can have both a statically assigned IP address of 192.168.69.2/24 and a DHCP assigned address, enabling you to reach the configuration IP of the radio while still being able to use dynamically assigned team IP addresses.

Network Assistant Tool Download

Windows

V1.0.1_01132025

115KB

vh_network_assistant.zip

archive

Open

SHA-256

47e7de3dc400f85116a06483bb922a85d3ab3740e4efde87de4bd6d942801941

Using The Network Assistant Tool

1

Download the Network Assistant Tool

Download the latest version of the Network Assistant Tool above

2

Decompress the archive

Right click the downloaded ZIP file, extract contents

3

Launch the Network Assistant Tool

Right click the "vh_network_assistant.EXE" executable and "Run as Administrator"

4

Select Your Network Adapter from the List

Select the network adapter that's plugged into the radio's DS port

5

Click "Configure"

Click "Configure" to begin configuring your computer.

6

Wait For the Success Dialog

After a few seconds a success dialog will pop up. Click "OK".

7

Confirm Radio Configuration

Next, you'll be presented with the current radio configuration. Click "OK" to continue.

8

(Optional) Go to Radio Configuration Page

Next, you'll be presented with a dialog asking if you want to go to the radio's configuration page. Click "Yes" to be taken to the radio's configuration page. Click "No" to exit.